What is the purpose of the building energy performance certificate and who needs him. The building energy performance certificate is required mainly for sale or renting of a building new. This must be presented the purchase or prospective tenants on request. Energy is a resource that is not unlimited and is also becoming increasingly expensive. The end of oil is, renewable energies are already not yet in sufficient quantity, the development must go further in this area a lot and we need more and more energy. We need to save in all areas of raw materials and carefully deal with the resources. This means that we need to save energy.
For one thing, because the raw materials are becoming scarcer and thus more expensive, on the other hand because the necessary environmental and climate protection obliges us to do so. Because everything that we consume energy, pollute our environment, leaving damage and strains with which subsequent generations have to live. Against this background, the energy saving regulation EnEV is 2007. She performed at the 01.10.2007 in force. Using this energy saving regulation, the EU energy efficiency policy to be implemented. Finally we are all called upon to save energy and thus raw materials. This is no longer just a thing the industry, households also are required. The industry strives to already held by pads and regulations – to save energy and to relieve the environment.
The guidelines for the industry regarding pollutant emissions are already very strict, at least for us. And other countries follow suit. Sure you can say that in some other States the policies are not enforced and the conditions and also the penalties are there much lower than ours, but in the long term this will change. The auto industry also developed vehicles with ever lower consumption. What years ago still not an issue for motorists was the excise can be crucial for the buying decision today. The high fuel costs have taught us that. A hitherto nor regarded point as the Fuel prices are the energy our houses and apartments. Only in the last few years these costs through the ever-increasing energy costs have become aware of us. The settlement of costs for houses and apartments increase every year and reach a level which many tenants and owners do not want to pay more and can often already. Due these incidental costs of the energy consumption of houses is put in the minds of consumers and the reduction of these costs has become an issue. This is the energy saving regulation comes in. Now, a building energy performance certificate is required for homes. This must be presented in the sale, rental and also larger modernization. Owner-occupied houses and apartments already rented objects are not yet affected, because their residents already know what energy costs annually to ensure they. The energy performance certificate should give purchasers and new tenants of objects from the front in a clear indication of the expected costs. The building energy performance certificate is created by the EnerSan GbR building energy consultants.
Active climate protection and strengthening the local forestry and timber industry are unabated best arguments for building with wood that holds successful history of building with wood. Timber-framed buildings and houses are the traditional construction methods, long time shaped the image of timber construction. But the timber construction has changed. Today, wood is a high-tech building materials for the construction and design of modern, trend-setting structures. Extensive research by universities and manufacturers over the past decades have helped to demonstrate the positive properties of the building material wood. Wood-based materials, construction methods and construction techniques have been developed, the climate problem-free construction material give a bright future.
Creative designers and innovative clients do much today, new, surprising and compelling solutions to the various challenges in the residential and commercial construction, as well as for infrastructure projects, such as bridges, to be realized. It is this trend to continue. The success story of the wood substrate can be grasped in numbers. Heinze has market research study found that 14.5 percent of the nearly 150,000 buildings created in Germany in 2007 were largely constructed of wood. In 2003, the rate in the home construction still amounted to 12.9 percent.
In particular, the South of Germany’s contribution to this development. As also in Austria and Switzerland, is the wooden construction rooted here traditionally (Bavaria 18.4%, Baden 21.8% in 2007). After absolute numbers Bavaria was in 2007 at the top: 5752 buildings were erected in the free State from renewable raw materials. This wood construction tradition forms the basis for an innovative use of the economically interesting and ecologically valuable construction material. \”In addition to the constructive properties there are above all the environmental aspects, the often decisive per wood\” type. Wood naturally has an excellent climate record. The use of indigenous Woods strengthens in not only the local forestry and timber industry, but they an important aspect holds also the transport expenses low, when looking at the overall energy balance of a building, included in the expenses for the production of building material used.
Frequently asked questions about the infrared heating due to infrared heaters ElectroSmog? Avoid beams of infrared heating through the glass? These and other questions are answered here. Are this infrared waves hazardous to health? In any case, the use of infrared heaters is not dangerous. The generated infrared radiation moves in the harmless band, the one which is used for medical purposes. If you have no sunlight allergy, then also infrared heaters for you should be no problem. What expenses do I have with high-quality infrared panels? Infrared heating systems are completely trouble-free. Under certain circumstances, you every now and again the individual heaters should wipe to remove any dirt, as well as other furnishings in the apartment. When my heating is constantly in operation, will the current cost be not enormously high? If you properly apply infrared heaters, as well as with a thermostat, so the infrared heating is usually not more than a few hours be switched on per day.
Overall, infrared heaters are highly efficient. Compared to conventional heating with oil or gas heaters with maintenance work connected infrared. There is virtually no heat loss consecutive quick warm-up during aeration. Takes a flat screen by the infrared rays damage? In any case, in this regard you need don’t worry. Flat screens are manufactured so that they can absorb solar radiation and this is considerably stronger than the power of an infrared heating system. Created by infrared heaters ElectroSmog? The majority of manufacturers are almost all infrared heating systems elektrosmogarm and below the legally prescribed norm. The resulting strain is similar to a conventional light bulb.
If you are not sensitive to this, you can stay still worry. Infrared heaters are a to modern concept for me. Should I wait for the time being once until there is more experience of infrared rays? The infrared heater is not a current invention. Also many years ago was heated with a similar concept – namely with the tiled stove. Escape the radiation the infra-red heating through the glass? This is only partly so. The beams of infrared heating escape just five per cent through the window, and almost no medium wavelength of radiation because window glass lets go through particularly long-wave rays of the Sun. However, it is not recommended to set your infrared heating systems, because Yes glass can not use as a heat storage on the window. It is more advantageous to align the infrared heating panels en on an interior wall or on a piece of furniture. An installation on the ceiling is mostly advisable, unless the Board is composed of natural elements such as wood. The infrared heater of aquarium water can be hot? No, this is not possible! Because the glass of an aquarium can pass up only 5% of the heating radiation, this performance is clearly too small to heat the water in your aquarium. Mark Tugenlieb
This is the sensitive device capable of, not only resistive Loads, but also complex consumption to determine correctly. Source: New York Museums. So, the users of even the lowest power consumption of new appliances, switching power supplies, as well as LED and installed can accurately measure. So he keeps in mind his actual energy consumption in the household. With a consumption of 0.3 w (without light), the energy master tracks down hidden guzzlers without consuming itself too much power. Also, the device has a backlit display, which facilitates a reading of the data.
Even after the separation of the power supply, the display for up to 30 minutes remains visible. Image material in high resolution can be obtained from. In brief: The ELV/eQ-3 Group counts for more than 30 years as innovation and technology leader in home automation and consumer electronics in Europe. ELV has established itself as a landmark electronic mail-order company on the German market since its founding in 1978 and offers more than 11,000 products online catalogue with a circulation of over 500,000 Copies of. With more than 150 types of products, the eQ-3 as a manufacturer of home control and energy management system solutions has the industry’s broadest portfolio of offerings. The brand HomeMatic”includes solutions from heating thermostats, lighting control and security technology through door lock actuators, window actuators, remote controls, gateways and home centers to software products of partners. Product development takes place exclusively in the headquarters in leer.
It is produced in our own factory in South China with certification according to ISO 9001, VDE, VdS, UL and ETL. This combination brings optimally consistent quality and cost aspects.
More efficient condensing technology increases the efficiency of oil heaters and is therefore environmentally friendly. Over many decades, the oil burner was the system of choice when it came to modern heating. Speaking candidly Danny Meyer told us the story. She has replaced old coal-fired ovens in many homes because it burns cleaner, developed less soot and the supply of the fuel is easier. New York Museums does not necessarily agree. Modern oil heaters have but now nothing more with the old models with constant boiler in common. Roughly speaking, an oil heater still consists of a boiler, a burner, a pump, the exhaust duct, the heating pipes and of course the radiators.
In the boiler, water is heated by combustion of fuel that flows through the heating, cooled then the boiler flows back and is warming up again. The gases resulting from the combustion derive from outward through the chimney. In conventional and low-temperature boilers must exhaust the water vapour in the exhaust gas does not reach a certain temperature, thus condensed and versottet the fireplace or boiler corrodes. Oil heaters with condensing Anders in a modern oil heating system with condensing technology. Here, the heat in the exhaust gas is used. It is cooled via heat exchanger so far, that condenses the water vapor. This condensate is derived. For an oil heater with condensing technology, a new exhaust pipe is necessary because the exhaust is so cool.
For new buildings, this represents a great advantage, because the exhaust pipe requires significantly less space than a large chimney. The efficient use of the fuel oil heating achieved very high efficiency with condensing technology. That in turn is accompanied by a very low consumption of fuel oil. Savings of twenty to forty percent old constant boilers are quite. Modernization this high saving potential shows that it is worth for consumers anyway even with a modernisation, to draw an oil heater with condensing technology into account. The slightly higher cost will pay for itself in a modernization within a very short time, especially as rising prices for heating oil must be assumed.
More and more uranium comes from hot crisis zone of Kazakhstan Astrid Schneider cleaned up with one of the cheekiest atom lies. Because dasUran of the German nuclear reactor comes more from unsafe regions of crisis. “Uranium is absolutely no indigenous energy sources, as Germany is dependent on imports to 100 percent. Also, depending on the Kazakhstan, located in high-explosive hotspots between Afghanistan, Pakistan, China, Russia, and the Iran. “, said the Green deputies Astrid Schneider.
She systematically disguised uranium by the industry and the Federal Ministry of Economics supply situation, criticized Schneider sharp. “” Because even on the homepage of the Federal Ministry of Economics is wrongly claimed that uranium is a domestic energy source “, just because the refining step” achievements of uranium in Germany. She took kursierender even if the IPCC scenarios of nuclear – that the so-called nuclear renaissance ideologically driven to speculative uranium resources and more speculative technologies, such as always based fast breeder technology shifted again in the distant future or of nuclear fusion. German nuclear reactors are all homicidal underinsured an energy future with more nuclear power would be safer and cheaper for the consumer? In the case of a nuclear disaster, the German nuclear operators were all homicidal underinsured. “, said Astrid Schneider, who is responsible in the Berlin House of representatives for consumer protection.
Schneider explained that the liability for nuclear power plants in Germany is only 2.5 billion euros. According to Swiss nuclear supervisory authority, the expected costs of a GAU cheat approximately 4.3 trillion euros. If the damage is but the 1700-fache (!) of the ridiculously low nuclear liability sum of 2.5 billion euros. The gigantic damage and consequential damages would shuffle off profit-hungry nuclear power plant operators on the general public and therefore the injured citizens. “Not to mention the fact that Germany indefinitely to the nuclear contaminated no go area”, still under the level a dysfunctional developing country, would fall. Council of experts sees light at the end of the tunnel In the context of the envisaged energy concept of the Federal Government with the incident nuclear power discussion by June 25, 2010 the cost of nuclear, the uranium supply situation and incident record discussed. Based on a recent study, but also a contrasting view was offered by Dr. Christian Hey feasible switching to 100% abolishing nuclear power running renewable energies on. With corresponding political will in the renewable energy revolution is possible, in 30 years to 100 percent the Secretary-General of the Council of advisers of the Federal Government of Christian Hey. Ralph Thomas Kappler incident nuclear power: Internet: